Device Management

The Device Management page allows you to define new cameras and adjust previously configured cameras.

Camera: Joystick control address.

IP: Shows the IP address of the saved network camera.

Port: The control port of the saved network camera.

Protocol (Network): The control protocol of the saved network camera.

Baudrate: The baud rate of the saved camera.

Address: The camera control address of the saved analog camera.

Protocol (Analog): The control protocol of the saved analog camera.

Operate: In the final column, the Operate Button lets you edit the settings of the saved camera, click “snap” to take a snapshot of the camera’s current view, or click “Home” to send the selected camera to the home position.

Clicking the Operate Button opens a sub-menu from which you can make numerous changes to the selected camera.

• Connection:

  • Network/Analog: Change the camera from Network based control to Analog.
  • Protocol: Select the protocol you want the camera to use.
    • Options Include:
      • VISCA UDP
      • VISCA TCP
      • VISCA UDP SONY
      • VISCA WEBSOCKET
      • ONVIF
  • Address: Lets you view or change the IP address of the selected camera.
  • Control Port: The default control port will depend on the selected protocol. For example, UDP = 1259, TCP = 5678, Sony = 52381, VISCA Websocket = 5678, & ONVIF = 80.

• HDMI Output: Determine a URL destination for the Joystick's HDMI output.

• Custom: Assign the camera to a custom button. These custom buttons will be further explained in the custom section.