Getting Started

SimplTrack3 Web UI

The PTZOptics SimplTrack3 Web UI is a browser-based control interface that provides full access to your SimplTrack3 camera's PTZ controls, image settings, auto-tracking configuration, streaming setup, NDI settings, and device management.

Accessing the Web UI

The Web UI can be accessed at http://ptzoptics.local or by entering your camera's IP address in a web browser shown below.

Open a web browser and enter to your camera's IP address:

http://[camera-ip-address]

Example: If your camera's IP address is 192.168.1.100, enter:

http://192.168.1.100

You will be presented with a login screen. Enter your Username and Password, then click Login.

note

If this is your first time logging in, you will be prompted to enter a new password before the initial login process:

• Username Default: admin

Finding Your Camera's IP Address

You can find your camera's IP address using the PTZOptics Fleet Manager or by following these steps. Finding Your Camera's IP Address

Sidebar Overview

The sidebar provides navigation across all sections of the web interface:

Element	Description
PTZOptics Logo	Displayed at the top of the sidebar.
Dashboard	Main camera control page with live preview, PTZ controls, presets, OSD menu access and image settings.
Automation	Auto-tracking configuration, zone management, and tracking actions.
Audio & Video	Video encoding, stream configuration, and audio settings.
Streaming Settings	RTMP(S) and RTSP streaming configuration.
Network Settings	LAN configuration and NTP time synchronization.
Hive Studio	Hive linking interface.
NDI Settings	NDI discovery, naming, and output configuration.
Device Info	Device identification, firmware version, and support.
System Settings	Tracking behavior, control protocol, IR remote, user management, firmware updates, and factory resets.
Reboot	Restarts the camera.
Logout	Logs out of the web interface. Located in the top right-hand side of the page.