Main Menu
Opening the On-Screen Display provides the list of sub-menus seen below.
1. Exposure
2. Color
3. Image
4. Noise Reduction
5. Setting
6. Information
7. Restore Default
The following settings can be adjusted from the Exposure menu:
| Exposure Mode |
|---|
| Options | Full Auto, WDR, Bright, Shutter Priority, Manual |
| Default | Full Auto |
Exposure Modes Explained
-
Full Auto: The camera automatically adjusts exposure. The user can fine-tune ExpComp, GainLimit, Backlight, DRC Strength, and Anti-Flicker.
-
WDR (Wide Dynamic Range): Enhances detail in high-contrast scenes. The user can adjust WDR Strength.
-
Bright: Optimized for low-light environments. The user manually sets Bright level, Gain Limit, DRC Strength, and Anti-Flicker.
-
Shutter Priority: The user manually sets Exposure Time and Gain Limit while the camera adjusts other parameters automatically.
-
Manual: Full manual control over Exposure Time, Gain, and DRC Strength.
Additional Exposure Settings
| ExpCompMode |
|---|
| Options | On, Off |
| Default | On |
| Note | Available only in Full Auto mode. |
| ExpComp |
|---|
| Options | -7 ~ +7 |
| Default | 1 |
| Note | Available only in Full Auto mode when ExpCompMode is On. |
| Gain Limit |
|---|
| Options | 0 ~ 14 |
| Default | 3 |
| Note | Available in Full Auto, Bright, and Shutter Priority modes. |
| Backlight |
|---|
| Options | On, Off |
| Default | Off |
| Note | Available only in Full Auto mode. |
| DRC Strength |
|---|
| Options | 0 ~ 8 |
| Default | 5 |
| Note | Available in Full Auto, Bright, Shutter Priority, and Manual modes. |
| Anti-Flicker |
|---|
| Options | Off, 50Hz, 60Hz |
| Default | 60Hz |
| Note | Available in Full Auto, Bright, and Shutter Priority modes. |
| WDR Strength |
|---|
| Options | 0 ~ 6 |
| Default | 0 |
| Note | Available only in WDR mode. |
| Bright |
|---|
| Options | 0 ~ 17 |
| Default | 11 |
| Note | Available only in Bright mode. |
| Exposure Time |
|---|
| Options | 1/30s, 1/60s, 1/90s, 1/100s, 1/125s, 1/200s, 1/250s, 1/350s, 1/500s, 1/725s, 1/1000s, 1/1500s, 1/2000s, 1/3000s, 1/4000s, 1/6000s, 1/10000s |
| Default | 1/60s |
| Note | Available in Shutter Priority and Manual modes. |
| Gain |
|---|
| Options | 0 ~ 7 |
| Default | 3 |
| Note | Available only in Manual mode. |
The following settings can be adjusted from the Color menu:
| WB (White Balance) Mode |
|---|
| Options | Auto, VAR, Manual, One Push, 5000K/Outdoor, 3000K/Indoor |
| Default | Auto |
White Balance Modes Explained
-
Auto: The camera automatically adjusts white balance. Fine-tuning via AWB Sens, RG Tuning, BG Tuning, and Saturation is available.
-
VAR: The user manually sets Color Temperature, RG Tuning, BG Tuning, and Saturation for precise white balance control.
-
Manual: The user manually sets R Gain and B Gain for precise white balance control.
-
One Push: The camera adjusts white balance based on a single button press. RG Tuning, BG Tuning, and Saturation remain adjustable.
-
5000K/Outdoor: Fixed white balance preset optimized for outdoor or daylight conditions (~5000K). Saturation is adjustable.
-
3000K/Indoor: Fixed white balance preset optimized for indoor or warm-light conditions (~3000K). Saturation is adjustable.
Additional Color Settings
| AWB Sens |
|---|
| Options | Low, Middle, High |
| Default | High |
| Note | Available only in Auto mode. |
| Color Temp |
|---|
| Options | 2500K ~ 8000K |
| Default | 5000K |
| Note | Available only in VAR mode. |
| R Gain |
|---|
| Options | 0 ~ 255 |
| Default | 148 |
| Note | Available only in Manual mode. |
| B Gain |
|---|
| Options | 0 ~ 255 |
| Default | 84 |
| Note | Available only in Manual mode. |
| RG Tuning |
|---|
| Options | -10 ~ +10 |
| Default | 1 |
| Note | Available in Auto, VAR, and One Push modes. |
| BG Tuning |
|---|
| Options | -10 ~ +10 |
| Default | 1 |
| Note | Available in Auto, VAR, and One Push modes. |
| Saturation |
|---|
| Options | 60% ~ 200% |
| Default | 100% |
The following settings can be adjusted from the Image menu:
| Luminance |
|---|
| Options | 0 ~ 14 |
| Default | 7 |
| Contrast |
|---|
| Options | 0 ~ 14 |
| Default | 7 |
| Sharpness |
|---|
| Options | 0 ~ 14 |
| Default | 3 |
| Flip-H |
|---|
| Options | On, Off |
| Default | Off |
| Flip-V |
|---|
| Options | On, Off |
| Default | Off |
| Gamma |
|---|
| Options | EXT, Default, 0.45, 0.5, 0.56, 0.63 |
| Default | EXT |
| Style |
|---|
| Options | Clarity, Bright, Soft, 5S, Norm |
| Default | Clarity |
| LDC (Lens Distortion Correction) |
|---|
| Options | Off, 1 ~ 6 |
| Default | 3 |
Adjusts the levels of digital noise reduction.
| 2D-NR (2D Noise Reduction) |
|---|
| Options | Close, Auto, 1 ~ 5 |
| Default | 3 |
| 3D-NR (3D Noise Reduction) |
|---|
| Options | Close, 1 ~ 8 |
| Default | 4 |
| Dynamic Filter |
|---|
| Options | Close, 1 ~ 6 |
| Default | 3 |
The following settings can be adjusted from the Setting menu:
| Language |
|---|
| Options | English, Chinese |
| Default | English |
| EPTZ |
|---|
| Options | On, Off |
| Default | On |
| Zoom Limit |
|---|
| Options | 1.5x, 2x, 3x, 4x, 8x |
| Default | 4x |
Displays read-only camera information such as firmware version and device details.
Restore Default
Resets all OSD settings to their factory default values.