Warnings & Precautions

Warning

Installation must be in accordance with national and local electric safety standards.

Most PTZOptics products with the exception of our webcams use a 12V DC with a maximum current supply of 2A. The polarity of the power supply plug is critical and is as follows:

Avoid subjecting PTZOptics camera's or joysticks to stress, vibration, or moisture during transportation, storage, installation, and operation.
Do not lift or move PTZOptics cameras by grasping the camera head. To avoid mechanical damage, do not turn camera head by hand.
Do not expose PTZOptics cameras or joysticks to any corrosive solid, liquid, or gas.
For PTZOptics cameras, please make sure that there are no obstacles in the pan or tilt ranges of the camera lens.
Complete installations before powering on PTZOptics equipment.
Do not dismantle the camera - PTZOptics is not responsible for any unauthorized modification or dismantling.
This is an FCC Class-A product. In a domestic environemt, this camera may cause radio interference. In the event of radio interference, the user may be required to adequately mitigate it.

Store batteries in a cool and dry place.
Do not throw away used batteries in the trash. Properly dispose of used batteries through specially approved disposal methods.
Remove the batteries if they are not in use for long periods. Battery leakage and corrosion can damage the remote control.
Do not use old batteries with new batteries.
Do not mix and use different types of batteries: alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium).
Do not dispose of batteries in a fire. Do not attempt to short-circuit the battery terminals

Do not subject the camera or joystick to rain or moisture.
Do not remove the cover. Removal of the cover will void the product’s warranty and may cause an electric shock. For any abnormal operation, please contact support@ptzoptics. com.
Never operate outside of the specified operating temperature range or humidity.
The power supply included in the box is the only power supply to be used with PTZOptic's product. To purchase a replacement, please visit ptzoptics.com/where-to-buy/.
Please use a soft cloth to clean the unit. If the unit is very dirty, clean it with diluted neutral detergent; do not use solvents which may damage the surface.